Cold Rolled Steel Strips

Cold Rolling Steel Grades
  • Mild Steel in Drawing, Deep Drawing, Extra Deep Drawing Grades , IF Steel
  • SAE 1010, SAE 1020, SAE 1040, SAE 1045, SAE 1050, SAE 1060, SAE 1080
  • Electrical Steel
  • High Tensile Steel (UTS 340 – 590 Mpa)
  • 16MnCr5
Steel Standards applicable
  • JISG : 3113, 3131, 3134, 3135, 3141
  • EN : 10130, 10149
  • IS : 513, 1079, 7226
  • BS :1449
Production Capacity
  • 1, 00, 000 TPA
Thickness Range
  • 0.30 – 2.0 mm in CRCA
  • 2.00 – 4.5 mm in HRSPO
  • 2.00 – 4.5 mm in HR Strips & Sheets
Width Range
  • 21 – 1010 MM
Strip Temper
  • Normal Soft
  • Quarter, Half and Full Hard
Surface Finish
  • Mirror
  • Bright
  • Matt
Edge Condition
  • Slit edge
  • Mill edge
  • Sheets
Coil Internal Diameter
  • 400 mm and 510 mm
Coil Outer Diameter
  • M1300 mm with Slit Edge
  • 1800 mm with Mill Edge
Cut to Length Sheets
  • Length : 200 – 3500 mm
  • Width : 60 – 1000 mm